General Data - Skoda Octavia II Bedienungsanleitung

Important
The towing coupling is intended for linking the trailers of the overall weight
up to 1700 kg (the limitation of the trailer weight shown in the Technical
Certificate of the vehicle must be respected). The towing coupling can also be
mounted in combination with the spoiler of the rear bumper FAA 610 002.
The towing coupling is manufactured according to the approved
documentation, and it complies with the homologation e1*94/20*1430 (4x2)
and e8*94/20*0075 (4x4).
The TMB PS 016 towing coupling is intended for Škoda Octavia II vehicles in
design with front axle drive 4x2, towing coupling TMB PS 041 is intended for
Škoda Octavia II vehicles in 4x4 design.

General data

The design of the towing coupling meets all Czech and international regulations.
The coupling has passed the strength tests in compliance with the Europeann
Directive 94/20ES; the design is protected with the certificate of the registration of
the Utility Design No. 5955.
The towing arm is fitted with a ball journal with a 50 mm diameter in compliance
with ISO 3853.
The electric installation for the towing coupling is not included in the scope of
the delivery, and it must be ordered separately.
For the installation, orifices must be cut out in the bottom side of the rear bumper.
List of the parts of the towing coupling (fig. 1):
Name of the part
Complete beam with tilting socket holder
(with identification label affixed to the
rear of the socket holder)
Screw M10 x 35
Towing arm with accessories
(cover of the ball journal, key to the lock
of the clamping lever of the towing arm (2 pcs))
Cover of the clamping bush
Self-adhesive label "75 kg"
27
TOWING COUPLING
Pieces Position
1 A
4 B
1 C
1 D
1 E