User Qualification; Design; Afunction Description - GOK Caramatic Basic Two Montage- Und Bediensungsanleitung

USER QUALIFICATION

ASSEMBLY, MAINTENANCE, SHUT-DOWN,
REPLACEMENT, RESTART,
RESTORATION, DISPOSAL,
START-UP
Leak check
*Qualified personnel within the meaning of these technical regulations (work sheet
DVGW G 607 [A] or G 608 [A]) are in particular those qualified personnel recognised by the
DVFG who can, on the basis of their training, knowledge and experience gained during
practical activity, guarantee that they will carry out the inspection properly.

DESIGN

AFUNCTION DESCRIPTION

Central and changeover regulator
Always turn the rotary knob
The operating cylinder determined by the rotary knob
The Caramatic Basic Two two-cylinder system then automatically switches to the previously
determined reserve cylinder once the operating cylinder is empty.
4 / 12
Activity
as far as it goes towards "Operation" or "Reserve"!
qualified personnel, customer service
user and operator
expert*
At the changeover regulator
knob to determine which gas cylinder should be
used as the reserve cylinder or the operating cylinder.
If, for example, the arrow on the rotary knob
switched to "Reserve", the gas from the cylinder with
the central regulator
cylinder with the changeover regulator
as the reserve cylinder. If, on the other hand, the
arrow on the rotary knob
"Operation", the gas is taken from the cylinder with
the changeover regulator
with the central regulator
cylinder.
is emptied first.
Caramatic Basic Two
Qualification
Central regulator
Changeover regulator
Inlet connections
Connection port
Pressure gauge
Breather
Rotary knob for the
operation of reserve
cylinder
Connection block for de-icer
Outlet connection for
medium pressure hose line
without figure
you can use a rotary
is given priority. The gas
then serves
is switched to
and the gas cylinder
serves as the reserve
part no. 02 018 51c
is