chargeable batteries when flat and/or
when you will not be using the child/par-
ent unit for an extended period of time.
This prevents flat batteries from leaking
the liquid they contain and damaging
the unit and/or objects nearby.
- Do not short-circuit the battery poles.
- It is not advisable to use rechargeable
batteries for the baby unit, as they may
reduce the functionality of the unit. The
baby unit is not designed to work with
rechargeable batteries. Use AAA 1.5 V
alkaline batteries (not included).
NOTE: if the duration of rechargeable
batteries supplied with the parent unit
is reduced excessively, they have run out
and therefore must be replaced (this is to
be considered normal because recharge-
able batteries run out over time).
- The rechargeable batteries supplied
with the parent unit must be recharged
using the mains adapter (1) supplied only
(code 20256300200).
- Do not attempt to recharge non-re-
chargeable batteries: they may explode.
- This product is not designed to work
with lithium batteries.
CAUTION: improper use may create
hazardous conditions.
- Never leave flat batteries in the baby
unit . Replace them immediately as they
could leak corrosive and/or dangerous
liquids.
- Never leave flat rechargeable batteries in
the parent unit . Recharge immediately (or
replace if run out) as they could leak cor-
rosive and/or dangerous liquids.
- If the batteries should leak liquid, ad-
equately protect hands and replace the
batteries immediately, taking care to
thoroughly clean the battery compart-
ment and anything else touched by the
liquid. Wash your hands thoroughly
when finished. Do not mix batteries of
different brands or types and flat batter-
ies with new ones. Insert the 1.5 V AAA
alkaline batteries (not supplied) in the
baby unit , making sure that the inser-
tion polarity is as indicated in the battery
compartment.
- Insert the 3x1.2 V, NiMh, 700 mAh,
AAA rechargeable batteries (included)
in the parent unit , making sure that the
insertion polarity is as indicated in the
battery compartment.
- Remove the alkaline/rechargeable bat-
teries from the product before disposal.
- Do not leave alkaline/rechargeable bat-
teries and/or any tools for their removal
within the reach of children.
- Do not dispose of alkaline/recharge-
able batteries in fire or throw them away
carelessly or in the household waste.
- Recycle used batteries in accordance
with applicable laws.
3.1 Installing alkaline batteries (not
included) in the baby unit
Remove the fastening screw from the
alkaline battery compartment closing
panel (8) (fig. 1), push it gently in the di-
rection of the arrow and remove it from
its position (fig. 2).
Insert three 1.5 V AAA/L03 alkaline
batteries, respecting the proper inser-
tion polarity as indicated in the battery
compartment. Reposition the alkaline
battery compartment closing panel (8),
inserting the hooks in their battery com-
partment housing and gently pushing in
the opposite direction to the one shown
by the arrow (fig. 3). Finally, screw the
closing panel back on (fig. 4).
3.2 Replacing alkaline batteries (not
included) in the baby unit
Remove the fastening screw from the
alkaline battery compartment closing
18