Connecting Machine To Power Source - Singer 8280 Bedienungsanleitung

Connecting machine to power source

Connect the machine to a power source as illustrated. (1)
This appliance is equipped with a polarized plug which must be used with the
appropriate polarized outlet. (2)
Attention:
Unplug power cord when machine is not in use.
Foot control
The foot control pedal regulates the sewing speed. (3)
Attention:
Consult a qualified electrician if in doubt as to connect machine to power
source.
Unplug power cord when machine is not in use.
The foot control must be used with the appliance by 4C-316B (110-120V
area) / 4C-326G (230V area) / 4C-316C or 4C-326C (220-240V area)
manufactured by MATSUSHITA ELECTRIC (TAIWAN) CO., LTD.
Sewing light
Press main switch (A) for power and light on " l ".
IMPORTANT NOTICE
For appliance with a polarized plug (one blade is wider than the other). To
reduce the risk of electric shock, this plug is intended to fit in a polarized
outlet only one way. If it does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
1
Polarized attachment plug
Conductor intended
to be grounded
2
6
A
3