Maintenance - Carina Power & stretch Bedienungsanleitung

5

Maintenance

Attention:
Disconnect the machine from the electricity
supply by removing the plug from the mains
socket. When cleaning the machine, it must
always be disconnected from the electricity
supply.
Remove the stitch plate
Turn the handwheel until the needle is fully
raised. Open the hinged front cover and
unscrew the needle plate screw with the screw
driver.
Cleaning the feed dog:
Remove the bobbin case and use the brush
supplied to clean the whole area.
Cleaning and lubricating the hook
Remove the bobbin case. Snap the two hook
retaining arms (1) outwards. Remove the hook
race cover (2) and the hook (3) and clean with
a soft cloth. Lubricate at the points (4) (1-2
drops) with sewing machine oil. Turn the
handwheel until the hook race (5) is in the left
position. Replace the hook (3). Replace the
hook race cover and snap back the two hook
retaining arms. Insert he bobbin case and
bobbin and replace the stitch plate.
Important:
Fabric fluff and threads must be removed
regularly. Your machine should be serviced at
regular intervals at one of our service agencies.
1
4
3
2
24