Winding The Bobbin - Carina Power & stretch Bedienungsanleitung

1
3
5
8

Winding the bobbin

2
4
6
9
7
8
- Place thread and spool
holder onto spool pin (1).
For smaller spools of thread
place spool holder with
small side next to spool (2).
- Wind thread clockwise
a r o u n d b o b b i n w i n d e r
tension discs (3).
- Thread bobbin as illustrated
and place on spindle (4).
- Push bobbin to right (5).
- Hold thread end (6). Step
on foot control pedal (7).
- Cut thread (8). Push bobbin
to left (9) and remove.
Please Note:
When the bobbin winder
spindle is in "bobbin winding"
position, the machine will not
sew and the hand wheel will
not turn. To start sewing, push
the bobbin winder spindle to
the left (sewing position).