Stitch Width / Length Dial - Carina Power & stretch Bedienungsanleitung

Stitch width dial
Stitch length dial
5 4 3 2
4 3 2 1 0.5 0
3 1 0.5
4 2

Stitch width / length dial

Stitch width: 0~5
Stitch length: 4
1 0
Stitch width: 0
Stitch length: 0~4
Stitch width: 5
Stitch length: 0.5~4
Function of stitch width dial
The maximum zigzag stitch width
for zigzag stitching is "5",
however, the width can be
reduced on any patterns. The
width increases as you move
zigzag dial from "0" to "5". For
twin needle sewing, never set the
width wider than "3".
Function of stitch length dial
Straight stitching
Set the stitch width dial to "0".
The stitch length is controlled with
the stitch length dial. While "2" or
"3" on the dial gives a suitable
s t i t c h l e n g t h f o r o r d i n a r y
purposes.
Generally speaking the finer the
fabric the finer the thread and
shorter the stitch length, the
heavier the fabric the thicker the
thread and longer the stitch
length.
At "0" the fabric will not move
ahead, and the needle will keep
piercing the same point.
Zigzag stitching
The density of zigzag stitches
increases as the setting of stitch
length dial approaches "0".
Neat zigzag stitches are usually
achieved at "2.5" or below.
Closed up zigzag stitches (close
together) are referred to as a
"satin stitch".
16