Wlan Interface(Id Isc.mr200-W) - Feig Electronic OBID ID ISC.MR200-EP Montageanleitung

®
OBID i-scan

5.1.2 WLAN Interface(ID ISC.MR200-W)

The prerequisite for using TCP/IP protocol is that each device on the network have a unique IP
address. All Readers have been assigned a factory default IP address.
IP address
Subnet mask
Port
Table 5-3: Standard configuration of the WLAN interface
Note:
The Readers must be connected to the network and configured in succession.
FEIG ELECTRONIC GmbH
Montage / Installation
Network
172.168.10.10
255.255.0.0
10002
Page 49 of 53
Address
ID ISC.MR200-W/EP
M50808-4de-ID-B.doc