Zulassung; Europa (Ce); Usa (Fcc) - Feig Electronic OBID ID ISC.MR200-EP Montageanleitung

®
OBID i-scan

6.1 Zulassung

Die Declaration of Conformity befindet sich am Ende des Dokumentes

6.1.1 Europa (CE)

Die Funkanlage entspricht, bei bestimmungsgemäßer Verwendung den grundlegenden Anforde-
rungen des Artikels 3 und den übrigen einschlägigen Bestimmungen der R&TTE Richtlinie
1999/5/EG vom März 99.
Equipment Classification gemäß ETSI EN 300 330 und ETSI EN 301 489: Class 1

6.1.2 USA (FCC)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
Unauthorized modifications may void the authority granted under Federal communica-
tions Commission Rules permitting the operation of this device.
Warning: Changes or modification made to this equipment not expressly approved by
FEIG ELECTRONIC GmbH may void the FCC authorization to operate this equipment.
Approval per FCC 47 CFR CH. I Part 15 applies to use with following antennas
Antenna
ID ISC.ANT300/300
ID ISC.ANT800/600
Tabelle 6-1: Approved Antennas
FEIG ELECTRONIC GmbH
Montage / Installation
FCC ID: PJMMR200
Reader configuration
Reduced output power (1 W)
Reduced output power plus 3 dB attenuation
Seite 27 von 53
ID ISC.MR200-W/EP
M50808-4de-ID-B.doc