Features Of The Reader Family Id Isc.mr200; Features; Available Reader Models - Feig Electronic OBID ID ISC.MR200-EP Montageanleitung

®
OBID i-scan
2

Features of the Reader Family ID ISC.MR200

2.1 Features

The ISC.MR200 is a device for contactless data exchange with common Transponder at an oper-
ating frequency of 13.56 MHz.
The ID ISC.MR200 is suitable for any application in which medium-range read distances are
required. An additional external antenna is required which must be connected to the reader.
An anti-collision function allows simultaneous reading of multiple transponders.
The Reader electronics are housed in a rigid, plastic enclosure with an IP54 protection rating for
use outdoors. It includes two digital inputs, two digital outputs and a relay output.
The Reader ID ISC.MR200-EP has a LAN interface and an asynchronous RS232 interface.
The Reader ID ISC.MR200-W has a wireless WLAN interface and an asynchronous RS232
interface.
A DC voltage can be applied to the antenna output. This voltage powers the Dynamic Antenna
Tuner (ID ISC.DAT).

2.2 Available Reader models

The following Readers are currently available:
Reader model
ID ISC.MR200-A
ID ISC.MR200-E
ID ISC.MR200-EP
ID ISC.MR200-W
Table 2-1: Reader models
FEIG ELECTRONIC GmbH
Montage / Installation
Description
Asynchronous interfaces RS232 and RS485 – metal housing
Asynchronous interface RS232 and Ethernet Interface – metal housing
Asynchronous interface RS232 and Ethernet Interface – plastic housing
Asynchrone Interface RS232 und WLAN Interface – plastic housing
Page 32 of 53
ID ISC.MR200-W/EP
M50808-4de-ID-B.doc