Interfaces; Rs232 Interface - Feig Electronic OBID ID ISC.MR200-EP Montageanleitung

®
OBID i-scan

3.12 Interfaces

3.12.1 RS232 interface

The RS232 interface is connected at Terminal X6.
The transmission parameters are configured using software protocol.
Pin assignments X6 (RS232 interface):
Terminal Abbreviation
1
2
3
Table 3-11: RS232 interface pin assignments
Fig. 3-13: Wiring example for connecting the RS232 interface
Note:
If there is an USB/RS232 converter used on the PC/Notebook side, we recommend to in-
crease the „Char Timeout Multiplier" parameter in the COM-Port settings from „1" to about
„5".
FEIG ELECTRONIC GmbH
Montage / Installation
GND RS232 – GND
RxD RS232 - RxD
TxD RS232 - TxD
ID ISC.MR200
X6
1
GND
2
RxD
TxD
3
Page 45 of 53
Description
9-pol. SUB-D-female
<−>
Pin 5 X6 / 1
<−>
Pin 3 X6 / 2
<−>
Pin 2 X6 / 3
ID ISC.MR200-W/EP
PC
M50808-4de-ID-B.doc