Seal Caps; Cover Stays; Decorative Covers - Feig Electronic OBID ID ISC.MR200-EP Montageanleitung

®
OBID i-scan Montage / Installation ID ISC.MR200-W/EP

3.3 Seal caps

The seal caps included in the scope of delivery can be used to close off unused cable fittings. Only
than the protection class IP54 can be reached.
The reducing ring provided is intended for the network connection. The slotted reducer is placed
over the network cable and then fixed in place in the cable gland.

3.4 Cover stays

The two cover stays can be used to attach the cover to the housing. The cover stays are inserted
into the openings provided for this purpose.
Fig. 3-3: Cover stay

3.5 Decorative covers

The decorative covers are installed at the reader. The notch in the center (arrow) is used for
opening the cover simplified.
Fig. 3-4: Decorative cover
FEIG ELECTRONIC GmbH Page 36 of 53 M50808-4de-ID-B.doc