Ethernet Interface(Id Isc.mr200-Ep); Wlan-Interface (Id Isc.mr200-W) - Feig Electronic OBID ID ISC.MR200-EP Montageanleitung

®
OBID i-scan

3.12.2 Ethernet interface(ID ISC.MR200-EP)

The Reader has an integrated 10/100Tbase network interface with RJ-45 connection. Terminal X8
serves as the Ethernet port.
Cat 5 cable should be used for structured cabling. This ensures reliable operation at 10Mbps or
100Mbps.
Pin assignments X8 (network interface):
Terminal Abbreviation
1
2
3
4
5
6
7
8
Table 3-12: Ethernet interface pin assignments

3.12.3 WLAN-Interface (ID ISC.MR200-W)

The Reader has an integrated wireless (802.11b) Ethernet interface with data-rates up to 11
Mbit/s. Terminal X8 serves as the Ethernet port.
FEIG ELECTRONIC GmbH
Montage / Installation
TX+ Transmit Data +
TX- Transmit Data -
RX+ Receive Data +
VETH+ n.c.
VETH+ n.c.
RX- Receive Data -
VETH- n.c.
VETH- n.c.
Page 46 of 53
Description
ID ISC.MR200-W/EP
M50808-4de-ID-B.doc