Berker KNX Touch Control Bedienungs- Und Montageanleitung Seite 29

Einstellungen System
Wecker
Parameters
Einstellungen System
–
Wecker
–
Even without confirmation the display brightness dims or brightens depending on the room
1)
brightness. After a further action, the brightness is reset to the confirmed mode.
Without any further action on the display the display with
2)
OFF returns to the defined start page.
For meanings of the number codes, see the application description on the homepage.
3)
Setting timer (Figure 6)
In the menu, up to 16 recurring time periods with an adjustable start
time and end time can be changed. An automatic function is assigned to each
time period, e.g. overnight shutdowns. Mo-Fr from 22:00 to 06:00 (Figure 6).
This time period can be assigned to one, two, ... all weekdays.
Time periods and the automatic functions to be executed during this time
must be programmed in the ETS beforehand. The page in the
is empty when delivered.
At least one time period with a function is programmed.
„ With enter menu
The display changes to the timer menu. The programmed time periods are
displayed (Figure 6).
„ Search and select the time period you wish to change using
„ Press the display surface for hours, then the display surface for the min-
utes of the start time
Wecker
Einstellungen System
Wecker
EIN
Weckzeit
Weckzeit
Actions
Wecker
Einstellungen System
+
–
Wecker
/
07 : 45
07 : 45
EIN
/ OFF
ON
Weckzeit
Weckzeit
/ OFF
ON
+
–
/
07 : 45
07 : 45
YES
YES
YES
/ OFF
ON
---
---
... 9
0
Table 1: Settings in the System menu
in succession.
Wecker
EIN
Settings
Wecker
+
EIN
+
see Setting timer
see Setting alarm
- Restart
:
address
: Display of the software versions
: Reading of licence conditions
Einstellungen
Sprache
System
, and select
Bildschirm
: 1 ... 6
3)
: 1, 2 ... - e.g.
3)
, Display of the physical
: Entry of a code
ON
returns to screensaver, and with
System
Sprache der
editierbaren Texte
.
Tastenton
z
menu
Einstellungen System
Sprache Sprache der
System editierbaren Texte
Bildschirm Tastenton
/ .
29