Berker KNX Touch Control Bedienungs- Und Montageanleitung Seite 26

z
After connecting to the auxiliary voltage, the displays of the time and date
are not current. A clock is required in the KNX installation for displaying the
correct data.
The display area is divided on the operating and display pages.
The top row of the display (8) is already preconfigured and at the first menu
level next to basic data such as weekday, date and current time, displays the
control surface
you where you are currently located in the menu.
System Einstellungen
The bottom row of the display (10) has a total of 10 evenly divided control sur-
Sprache Sprache der
System faces. From here, at the first menu level, individual, freely configurable pages editierbaren Texte
can be opened, or at subsequent menu levels, defined standard functions can
be triggered. The control surfaces for selecting pages are empty and can be
Bildschirm Tastenton
filled individually with text. For navigating within a menu level, two additional
functions
Between these two rows is the display and operating area (9) that can be free-
ly configured using the ETS.
Seite 6 Seite 7
(8) top display row for basic displays and device settings
(9) Display and operating area – freely programmable
(10) bottom display row for page selection and defined default functions
26
Figure 3: Standby display/screensaver
for
System
Sprache Sprache der
System editierbaren Texte
Bildschirm Tastenton
/ are available.
Mon 30/06/14
Figure 4: Layout of the display area
07:18
Monday 30 June 2014
. On the following menu levels, this line shows
07:22
Page 5 Page 6 Page 7
(8)
(9)
(10)