Berker KNX Touch Control Bedienungs- Und Montageanleitung Seite 27

Triggering a function, operating loads
Consumers, such as lighting, blinds, etc., are operated using the touch-sensi-
tive control surfaces, and are dependent on the device programming.
Each touch on the touch-sensitive surface can be confirmed by an acous-
tic signal when the button sound ON is switched on.
„ If the device is in standby mode, touch anywhere on the touch-sensitive
display area (1).
The last page/start page used is displayed.
If the proximity sensor in the menu
the display switches automatically to the last page/start page used upon
approaching.
„ Press a control surface in the display and functional area (9).
The stored function is executed.
The actuation pulse lasts for the duration of the actuation. Depending
on the function, short and long touches can trigger different actions, e.g.
switching/dimming or roller shutter/blind.
If no action is executed on the display within an adjustable time period, the
device returns automatically to standby display/to the screensaver – if this
is activated.
Setting device
Einstellungen System
Sprache
Sprache der
„ Press control surface
07:22
editierbaren Texte System
The display changes to the menu
Tastenton Bildschirm
„ Select submenu
„ With / go to the next/previous page, on which up to 4 setting parameters
each can be selected.
Wecker
Einstellungen System
„ Press control surface for the parameter required.
Sprache der
Wecker
editierbaren Texte
EIN
The display changes to another page where you must select once again,
Weckzeit
or it changes directly to the setting of the parameter (Figure 5).
Seite 5 Seite 6
+
–
„ With / decrease/increase the parameter value, with
07 : 45
Tastenton
preset value (Figure 5) or with ON / OFF activate/deactivate the parame-
ter (Table 1).
„ With confirm the entry.
The display returns to the previous menu level.
If the entries are not confirmed, with
menu level without saving. Using
previously as
Sprache der
in the top display row (8).
editierbaren Texte
Tastenton
.
Wecker
EIN
Weckzeit
Seite 7
+
07 : 45
Einstellungen
Sprache
System
Bildschirm
without saving.
-
.
Einstellungen System
Sprache
System
Bildschirm
Einstellungen System
System
Sprache
System editierbaren Texte
Sprache der
editierbaren Texte
Bildschirm
Tastenton
the display returns to the previous
the display returns to a page preset
is activated,
Einstellungen
Sprache der
editierbaren Texte
Tastenton
/ scroll to a
Sprache der
Tastenton
z
System
Sprache Sprache der
System editierbaren Texte
Bildschirm Tastenton
27