sogno Spark Triple Bedienungsanleitung Seite 94

Networking
Press [REC] button to start recording.
7.
Press [REC] button again to pause recording.
8.
Press [PLAY MODED] button to enter into Record
9.
menu.
10. Press [▲, ▼] buttons to select an option.
11. Press [ok] button to enter into Record Edit menu.
12. Press [◄, ►] buttons to change the duration.
Press [STOP] button to stop recording.
7.
Note:
1. Now it support two recordings.
2. You can record radio programmes also.
3. The record banner will be display whenever
pressing [INFO] button.
4. You also can change the recording duration in
menu > System > PVR/HDD Setting > Record
setting > Duration.
5. When a new scheduled recording starts while a
recording is already in progress, the record banner
will be displayed for a few seconds to information
that the recording has been started. If you are
watching the channel being recorded, a record
notice will pop – up 6 seconds before the
scheduled recording starts, and the channel will
switch to the scheduled programme automatically
at the start time.
Press the [POWER] button while recording will not
6.
stop the recording, a information displayed for
record will stop after 6 seconds before and standby.
If you select NO it will don't standby and still
recording.
7. Ensure that there is enough free space before
recording. If the free space on the hard disk drive is
insufficient, recording will stop. Recording one hour
of programme may require up to 2 or 3 GB of hard
disk space. The space for recording a 1 hour
programme may
preogramme.
To view the recorded programme list, go to menu >
8.
File list > Record menu.
differ depending on the
94