Scan Channel; Basic Operations; Changing Channels; Volume/Mute/Audio - sogno Spark Triple Bedienungsanleitung

Networking
Software Upgrade Notify: Press[◄, ►] buttons to
switch it between Enable and Disable.
Resource Transfer Mode: Press [◄, ►] buttons to
switch it between HTTP and FTP.

4.7 SCAN CHANNEL

Go to menu/Install/Satellite Install/Satellite, select an
appropriate satellite and then press [red] button to scan
channels.
Note: If don't scan channels, please contact the local
satellite antenna supply.

5 Basic Operations

5.1 Changing channels

You can change the channels in several ways.
Press the [▲, ▼] buttons in the full screen.

Enter the channel number directly with number

buttons.
Go to the TV List or Organizing Channel and

select a channel.
Note:
Press the [TV/RADIO] button to switch between TV

and radio channels.
Press the [RECALL] button to return to the previous

ten channels.

5.2 Volume/Mute/Audio

To adjust the audio volume, press the [◄,
buttons.
To mute the audio temporarily, press the [MUTE] button.

5.3 Setting audio options

Audio options are available only when the programme
supports multiple audio languages.
Press the [AUDIO] button to change the audio language
and direction.
Each time you press the [◄, ►] buttons, the value
changes.
Note: The mute function remains set while you change
channels.

5.4 Display Resolution

Press the [V.Format] button to set the resolution of the
screen.
90
►] or [V+, V-]