Hdd Format; Record Setting - sogno Spark Triple Bedienungsanleitung

Networking
Record Setting, Timeshift Setting and Youtuble

Record Setting.

9.2.1 HDD Format

The menu show the message about the USB disk.
Format Disk:
Press [red] button and press [▲, ▼] buttons to
1.
select a format for the disk, then press [ok] button
to start. This case can hold subarea
2. Press [green] button to enter into the menu:
[green] button: Add a new subarea.
a.
[yellow] button: Delete a subarea.
b.
c. [red] button: Save and partition the disk.
d. [blue] button: Format disk.
Note: Format disk will lost the disk data.
9.2.2 USB Speed Testing
This menu use to test the write and read speed of the
USB. You can press [red] button to test again. And the
right column show current speed can do what.
9.2.3 Record Setting
This menu include Record Path, Duration and Extend
Record Time.
Record Path: Press [ok] button to change the record
path.
Duration: Press [◄, ►] buttons to change the Duration
of each time.
Extend Record Time: Press [◄, ►] buttons to change
the extend time for record. It will add the time at each
begin and end.
9.2.4 TimeShift Setting
This menu include Enable, TimeShift Path and Time.
Enable: Press [ok] button to select ON and OFF.
TimeShift Path: Press [ok] button to change the
TimeShift path.
Time: Press [◄, ►] buttons to change the TimeShift
time.
113