Search Cable Channels (Fixed Antennal); Search Terrestrial Channels (Fixed Antennal) - sogno Spark Triple Bedienungsanleitung

Networking
8.2 Search Cable Channels
(fixed antennal)
Go to menu/Install/Cable Install, you can search
channels by manual or auto.
Note: If the antenna is not properly set, channel search
cannot be activated which means you cannot watch any
of the programmes.
In manual installation:
11. You can press [ok] button to select one or more TP
and press [red] button to scan channels.
12. Press [green] button to add a new transponder.
Freq: Enter the frequency of the transponder

between 70000 and 900000.
Sym:
Enter the

transponderbeween 1000 and 45000.
QAM: Select a QAM for the transponder.

Each time you press [◄, ►] buttons, the value changes.
16 <–> 32 <-> 64 <-> 128 <-> 256 . Press [ok] button to
confirm.
13. Press [yellow] button to edit the select
transponder.
14. Press [blue] button to delete the select
transponders.
15. Press [INFO] button to display the search channels
of the transponder.
symbol rate of the
107
In auto installation:
Press [ok] button to enter and it auto scanning channels.
8.3 Search Terrestrial Channels
(fixed antennal)
Go to menu/Install/Terrestrial Install, you can search
channels by manual or auto.
Note:
3. If the antenna is not properly set, channel search
cannot be activated which means you cannot watch any
of the programmes.
4. Cable install menu and terrestrial install menu can't
display at the same time.
First:
In config menu:
Press [◄, ►] buttons to select a properly region among
Australia, German and UK.
In manual installation:
16. You can press [ok] button to select one or more TP
and press [red] button to scan channels.
17. Press [green] button to add a new transponder.
Freq: Enter the frequency of the transponder

between 50000 and 900000.
Band Width: Press [◄, ►] buttons to select a

value among 6 MHz, 7 MHz and 8 MHz.
Channel No: Input channel number between

0 and 200.
Press [ok] button to confirm.
18. Press [yellow] button to edit the select
transponder.