sogno Spark Triple Bedienungsanleitung Seite 115

Networking
9.3.3 Dynamic Setting
Go to menu/system/IP config menu, press [green]
button enter into setting DDNS menu.
Dynamic Start: Press [

OFF.
User: Press [ok] button to input the user name.

Password: Press [ok] button to input the password.

Host: Press [ok] button to input the host domain

name.
Update Interval (Sec): Use number buttons to

input the time.
9.3.4 FTP Password
This menu use to change the FTP password.
User name: Display the user name, it can't be

edited.
Old Password: Press [ok] button to input old

password.
Change password: Press [ok] button to input new

password.
Confirm password: Press [ok] button to input new

password again.
Press [red] button to save.
buttons to select ON or
◄, ►]
115
9.3.5 Network hard disk
Setting those options, you can use network hard disk.
Network hard disk name: Press [◄, ►] buttons to

select an option as the name.
Service type: Press [◄, ►] buttons to select NFS

or CIFS.
Share folder: Press [ok] button to input the share

folder name.
Server IP: Use number buttons to input the server

IP that the share folder belong.
User Name: Press [ok] button to input the name.

Password: Press [ok] button to input the password.

Status: Press [◄, ►] buttons to select Active or

Inactive.
Note:
The User Name and Password can use, only when
1.
you select the Service type is CIFS. It say, you must
have User Name and Password can use the
network hard disk in this case.
Only select status is active, the network hard disk
2.
can display in the file list.
9.3.6 3G Network
In this menu, it has Access Point Name, Number, User
Name, Password, Mode and status. Except status, their
are all offer by service provider.