Config - sogno Spark Triple Bedienungsanleitung

Networking
times.
Press [◄, ►] and [▲, ▼] buttons to move the
2.
zoom place.
Note: Press [EXIT] button to cancel play.

11.6 Config

This menu use to register online server and config
online.
11.6.1 Register
Name: Press [ok] button to enter into Name
1.
Modification menu, and input the name.
2. Telephone: Press [ok] button to enter into
Telephone Modification menu, and input the
Telephone.
Address: Press [ok] button to enter into Address
3.
Modification menu, and input the Address.
E-mail: Press [ok] button to enter into E-mail
4.
Modification menu, and input the E-mail.
5. Language: Press [ok] button and then using [▲, ▼]
buttons to select, at last press [ok] button to
confirm.
6. User: It shows the STB ID.
Press [red] button to save and register.
7.
11.6.2 Clear online data
Press [yellow] button and select YES, then press [ok]
button to confirm.
Note: After do this the STB will reboot.
11.6.3 Setup online service
Press [green] button to enter into the menu.
Message Auto Play: Press [ok] button, then press

[▲, ▼ ] buttons to select on option, at last press [ok]
button. Or press [◄, ►]buttons to select an option.
Enable: The message can display at bottom of
video.
Disable: Can't display message when play video.
Software Upgrade Notify: Press [ok] button, then

press [▲, ▼] buttons to select on option, at last
press [ok] button. Or press [◄, ►] buttons to select
an option.
Enable: It give a message when the new version
gives.
Disable: Not message when the new version gives.
Resource Transfer Mode: Press [ok] button, then

press [▲, ▼] buttons to select on option, at last
press [ok] button. Or press [◄, ►] buttons to select
HTTP or FTP.
121