Adding A New Timer; Editing A Timer Affair; Deleting Timer Affairs; Installation - sogno Spark Triple Bedienungsanleitung

Networking
Go to menu/channel menu, then select Organizing
Timer or in EPG menu press [yellow] button.

7.7 Adding a new timer

Press [yellow] button to go to Timer menu.
5.
Set options
6.
Press [red] button to rename for the affair.
7.
Press [EXIT] and select YES to save and exit.
8.
Note:
4. You can't set the affair time before system time.
You also press [REC] button to add timer affair
5.
about the EPG in EPG Now/Next/Schedule menu.
6. You can't add timer affair more then eight.
Subjoin:
10. Number: Display the order of current item.
11. Service : Show the channel, if you want change,
press [ok] key.
12. Event name: Show event default name, you also
press [red] key to rename it.
13. Start date: Show start date of event, you can press
number keys to change it.
14. Start time: Show start time of event, you can press
number keys to change it.
15. End date: Show end date of event, you can press
number keys to change it.
16. Stop time: Show end time of event, you can press
number keys to change it.
17. Repeat: Show the event transact times, press [◄,
►] keys to switch among once, everyday, a week,
workday, weekend.
18. Timer mode: Type of the event, it has change
service and HDD record.

7.8 Editing a timer affair

Press [green] button to go to Timer menu.
2.
2. Set options
3. Press [red] button to rename for the affair.
4. Press [EXIT] and select YES to save and exit.

7.9 Deleting timer affairs

Press [ok] button to select one or more.
3.
Press [red] button to delete.
4.

8 Installation

Installation menu allows you to configure your antenna
and search the available TV and radio channels. You can
configure the fixed antenna, SCD antenna or motor
antenna with this receiver.
8.1 Search Satellite Channels
(fixed antennal)
Go to menu/Install/Satellite Install, you can search
channels by selecting the switch type and setting the
required satellite.
Note: If the antenna is not properly set, channel search
cannot be activated which means you cannot watch any
of the programmes on air.
8.1.1 LNB Only
You can either connect to an antenna with a single LNB
switch using an RF cable.
103