Factory Default - sogno Spark Triple Bedienungsanleitung

Networking

9.1.5 Factory Default

This menu is operating for database.
1. Load From Factory Default: Press [ok] button, it
display a warn information, select "YES" to come
back factory default.
Note: If you do Save As Factory Default before, it
will be back the database that you save.
Factory Reset: Press [ok] button, it display a warn
2.
information, select "YES" to come back factory
default.
Save As Factory Default: Press [ok] button, it
3.
display a warn information, select "YES" to save the
current database as factory default.
4. Delete All Channel: Press [ok] button, it display a
warn information, select "YES" to delete all
channels.
? Frequently Asked Question
Q: IF I incautiously delete all channels, what should I do?
A: There are two ways to restore:
To re-search all channels in "Installation" function.
Use "Default Value" function to restore all channels in
"Tools" function
9.1.6 Miscellaneous Setting
Banner display time: Press [ok] button, then press
1.
[▲, ▼] buttons to select on option, at last press [ok]
button. Or press [◄, ►] buttons to select option. It
controls the info bar display time. The options have
sec1-sec20.
Osd transparency: Press [ok] button, then press
2.
[▲, ▼] buttons to select on option, at last press [ok]
button. Or press [◄, ►] buttons to select option.
Standby mode: Press [ok] button, then press [▲,
3.
▼] buttons to select on option, at last press [ok]
button. Or press [◄, ►] buttons to select TRUE or
FALSE.
TRUE: When standby, only the front panel work, it
save electricity.
FALSE: When standby, it just stop output video and
audio, this case can't save electricity.
Remote mode: Press [ok] button, then press [▲, ▼]
9.
buttons to select on option, at last press [ok]
button. Or press [◄, ►] buttons to select RC1,RC2
or RC1&2.
RC1: The remote mode must use RC1, or STB can't
receive the control signal.
RC2 : The remote mode must use RC2, or STB can't
receive the control signal.
RC1&2: The remote mode no matter what, the STB
can receive the control signal.
10. HBBTv: It control HBBTv function. Press [◄, ►]
buttons to change it between ON and OFF.
ON: You can press [red] button to into the web at
has HBBTv function channel.
OFF: The HBBTv function can't use.
111