Networking
4.6 Easy Install
This menu to help you set basic function quickly.
When the STB is first used, there will show the Easy
Install menu.
When you used the Factory Reset function in
System/Basic Setting/Factory Default menu, it
also will show the Easy Install menu after reboot.
Note: If the software has default channel list, the STB
will play the first channel in the list.
4.6.1 Language Setting
Language setting allows you to select the main
language.
Select the appropriate language with the [▲, ▼] and
[◄, ►] buttons.
In this menu:
Press [P+] button to save it and go to the time Setting
menu.
4.6.2 Time Setting
Time setting allows you to set the system's time. It will
display on front panel with LCD, and info bar.
In this menu:
Press [P+] button to go to the Network Setting menu.
Press [P -] button to go to the Language Setting menu.
1. Auto update: Press [ok] button, then press [▲, ▼]
buttons, at last press [ok] button Or [◄, ►] buttons
select an option.
a. ON: Get the time from the channel info that you
will watch.
Note: Now the date and time does not edit.
b. OFF: You need manual set the date and time.
Note: Now you can't edit the GMT offset option.
YY/MM/DD: Press number key to set the date.
2.
3.
Time: Press number key to set the time.
GMT Offset: Press [ok] button, then press [▲, ▼]
4.
buttons, at last press [ok] button. Or [◄, ►] buttons to
select appropriate option.
5. Summer Time: Press [ok] button, then press [▲, ▼]
buttons, at last press [ok] button Or [◄, ►]buttons to
select ON or OFF.
4.6.3 Network Setting
Network Setting allow you setting for connect internet.
If you connect the LAN and it has DHCP service. At DHCP
88