Powering On/Off - sogno Spark Triple Bedienungsanleitung

Basic Operations

4.4 Powering On/Off

4. Connect the power cord of the product to a wall outlet.
5. Turn on the power switch of the rear panel.
6. Power on/off by pressing the [ POWER] button on the remote control or [ POWER] button on the front
panel.
? Frequently Asked Question
Q: The power of my STB has been turned on and not in Standby mode, but the TV screen showed
nothing:
A: Make sure the TV set has been set to the correct video input (not the TV channels). For example, if you
have connected the unit with the Video1 input of the TV set, the TV set has to be switched to Video1.
Q: The power of my STB has been turn on and not in Standby mode, but the TV screen showed nothing
except popup window with "No Signal" information.
A: That means the channel, which you select, is no signal. Check connection of signal cable or contact
operator.
85