Motor Setting - sogno Spark Triple Bedienungsanleitung

Networking
Auto <–> 1/2 <-> 2/3 <-> 3/4 <-> 4/5 <-> 5/6
<-> 6/7<-> 7/8 <-> 8/9 <->1/4 <-> 1/3 <-> 2/5
<-> 3/5 <-> 9/10.
Mode: Select the mode with DVB-S or

DVB-S2.
Press [ok] button.
8. Press [yellow] button
transponder.
[blue]
9. Press button
transponders.
10. Press [INFO] button to display the search channels
of the transponder.
8.1.6 Search Channels (Motor Antenna)
You can set the position of the satellites when using a
motor antenna for efficient channel search.
8. Check that your antenna connection and the
selected antenna type are correct.
9. Select the satellites that the motor antenna is
pointing to.
10. Set the type and location of your motor. (Motor
Setting)
11. Set your antenna position for the selected satellites.
12. Set the operation limit of your motor.
13. Press [red] button to scan, the found channels will
be listed.
14. When the search has completed, select save and
press [ok] button to save and exit.
Note:
6. Only channels of one satellite can be searched
when using a motor antenna. Please repeat the
search process to search more satellites.
7. Press [EXIT] button to stop and press [ok] button to
save and exit.
to edit the select
to delete the select
106
Refer to Setting Transponder for details in
8.
transponder setting.

8.1.7 Motor setting

Set the type and location of your motor.
6. In Menu/Install/Satellite/Edit Satellite menu,
press [yellow] button.
Select motor type at motor item.
7.
DiSEqC 1.2: General motor antenna using

DiSEqC 1.2.
USALS: Motor antenna using USALS.

Select My Longitude and enter the longitude and
8.
direction.
9. Select My Latitude and enter the latitude and
direction.
10. Select Set Limit and set the limit for the Motor.
Select the value is east or west

Select the Move Step or Move Continue to

move the Motor to east or west.
Select the save and press [ok] button to save

it.
Note: When Motor Type is set as DiSEqC 1.2, the menu
is not My Longitude, My Latitude.