Connecting The Network - sogno Spark Triple Bedienungsanleitung

Basic Operations
and enhance your viewing enjoyment.

4.3.3 Connecting the Network

1. Connecting to the LAN:
Connect one end of the Ethernet cable to the product and the other end to the LAN router.
Connecting to the Wi-Fi (Wireless LAN):
3.
You can connect the network via the Wi-Fi access point or DSL/cable modem.
Plug in the wireless USB dongle to the USB port.(Separate purchase required)
c.
Set the options for the Wi-Fi.
d.
Network Name (SSID): Select the network name of your Wi-Fi access point from the list.

Security Type (WEP): This product supports WEP 40/128bit ASCII and WEP 40/128bit HEX. The security

type of the Wi-Fi and the product shall be set the same.
Password: When using the security type, you must set the password. Enter the same password in the

Wi-Fi setting menu.
4. Connecting to the 3G:
Connect the network via the 3G card. Plug in the USB that has 3G card.
Note:
Make sure the distance between the Wi-Fi access point and the product is not too far away. This may
4.
lower the quality of service.
It is recommended to purchase a wireless USB dongle distributed by RT73, RT8192cu, RT3070, RT2870,
5.
RT2070, RT8712u, ZD1211b, ZD1211. Other products may not function or respond.
We recommend the network connection over a direct LAN.
6.
84