Integrating Into The Home Network - Mennekes Amton Premium Installationsanleitung

6.3.2 Integrating into the home network

If necessary, the device can be integrated into the home network to access the service interface and the MENNEKES
Charge APP at any time without further configuration. This allows configuration or operation of the device despite dis-
tance.
The integration of the device is carried out either via LAN or via WLAN. The router assigns the device a dynamic IP
address by default. If necessary, the a static IP address can be assigned to the device.
Via LAN
f Connect the device and router with a LAN cable. No further configuration is necessary.
The service interface can be reached at http://AMTRONIP:25000 (enter the IP address of the device instead of
"AMTRONIP"). The device receives its dynamic IP address via the DHCP function of the router, which may change depend-
ing on the configuration of the router.
The assigned IP address can be retrieved in the user interface of the router.
Operating instructions of the router.

Via WLAN
In order to integrate the device into the home network via WLAN, a previous configuration is necessary.
f Establish connection to the service interface.
Î "6.3.1 Setting up network connection"
f In the service interface, navigate to "User Settings" > "WLAN STA/Client Mode Settings".
f Enter the name of the WLAN in the "Network Name/SSID" field.
f Enter the WLAN password in the "WLAN Key" field.
f If necessary, select in the "Security Mode" field, the encryption system of the router.
By default, the encryption system is detected automatically. If this is not the case, select the encryption system
used by the router in "Security Mode".
f Confirm with "Submit".
Integration into the
home network
with a router
Via LAN
Static IP address
Via WLAN
Dynamic IP
address
EN
19