Mennekes Amton Premium Installationsanleitung Seite 56

As soon as the input has been confirmed with
"Submit", the device receives its IP address from
the DHCP function of the router. The service
interface is no longer available at the current
address.
During the connection, the service interface can
be reached at http://AMTRONIP:25000 (instead of
"AMTRONIP" enter the IP address of the device).
The device receives its dynamic IP address via the DHCP
function of the router and can change depending on the
configuration of the router.
The assigned IP address can be retrieved in the user inter-
face of the router.
Operating instructions of the router.

If the device loses the WLAN connection to the
network, the access point is activated automati-
cally.
Assign static IP address
If necessary, the a static IP address can be assigned to the
device. The IP address does not change.
For LAN connection:
f Navigate to "User Settings"> "Ethernet Settings" in the
service interface.
For WLAN connection
f In the service interface, navigate to "User Settings" >
"WLAN STA/Client Mode Settings".
f Activate the "Use static IP" field.
f In the "Static IP Address" field, enter the desired IP
address.
The static IP address is selected depending on
the router.
Precondition:
„ Router and device are in the same address
area.
„ The last three numbers of the IP address
should be greater than 200. Numbers up to
200 are often reserved for the DHCP function
of the router.
20
f Enter the subnet in the "Static Netmask" field.
f Enter the IP address of the router in the "Gateway
Address" field.
Operating instructions of the router.

f Confirm with "Submit".
During the connection with a static IP address,
the service interface can always be reached at
http://AMTRONSTATICIP:25000 (enter the static IP address
of the device instead of "AMTRONSTATICIP").
Example:
Settings in the service interface when assigning a static IP
address (connection to LAN). The router is FRITZ!Box with
the default IP address 192.168.178.1
Fig.: 17. Settings in the service interface when assign-
ing a static IP address (connection to LAN). The router is
Fritz!Box.
In case of the settings in the example, the service interface
can always be reached at http://192.168.178.222:25000.