General Application Instructions - HBM C2 Montageanleitung

General application instructions

4 General application instructions
12
Force transducers are suitable for measuring compres­
sive forces. They provide highly accurate static and
dynamic force measurements and must therefore be
handled very carefully. Particular care must be taken
when transporting and installing the devices. Dropping
and knocking the transducer may cause permanent dam­
age.
C2 series force transducers have a convex force applica­
tion part, to which the forces to be measured must be
applied.
Chapter 12 "Specifications", starting on page 29, lists the
permissible limits for mechanical, thermal and electrical
stress. It is essential to observe these limits when plan­
ning the measuring set-up, during installation and, ulti­
mately, during operation.
A0674-5.0 HBM: public
C2