K-FEE Grande Original Bedienungsanleitung Seite 22

Cleaning on request ( 2 )
EN
9
Risk of scalding!
Very hot water.
Danger to health:
Do not drink any cleansing
liquid.
min.
0.6 l
The appliance rinses at inter-
Insert water tank.
vals until the water tank is Place a container (min. 0.6 l)
empty. under the spout.
12
Clean water tank, re-fill wa-
ter tank (min. 300 ml) and
re-insert it.
Risk of scalding!
15
Very hot water.
The appliance rinses with
250 ml of water.
In order to terminate the
cleaning process, the water
tank has to be taken off and then
re-inserted.
Place a container under
spout.
Press rinse button.
42
10 11
Press rinse button. Wait until rinsing process is
finished.
Then empty container.
13 14
Remove drip trays. Empty and clean drip trays,
re-insert drip trays with
capsule container.
16 8 17 11
Wait until rinsing process is Remove water tank, fill the
finished. tank and re-insert it. The
Then empty container. light of the cleaning symbol
goes out.
1
Only use descaling agents that are suit-
able for the appliance. For further in-
formation, please visit our website at:
www.k-fee.com
The machine automatically prompts for a descaling process.
It takes the set water hardness into account and whether a
water filter is being used.
3 4
Off
3 sec. min.
To switch the machine off, Press rinse button for at
briefly press the on/off but- least 3 sec.
ton.
6 7 8
Empty container and then re- Remove and empty water
insert into the appliance. tank.
Descaling on request ( I )
2
Danger to health:
Carefully read the user in-
structions of the descaler and com-
ply with the safety instructions.
If the descaling process is
The machine shows a request
for cleaning on the display. interrupted by pressing the
on/off button, the appliance re-
turns to the descaling mode auto-
5
matically when switched on again.
Risk of damage!
Before removing the drip
trays, make sure that the spout is in
the uppermost position.
Remove drip trays with spent
capsule container.
The water filter must be re-
11 8
moved before descaling.
0.4 l
0.1 l
Fill water tank with descal-
ing agent (100 ml) and 0.4 l
of water.
EN
43