Parameter Setting - K-FEE Grande Original Bedienungsanleitung

Setting parameters:
EN
1
water hardness
For an overview for determin-
ing the degree of water hard-
ness, see page 52.
Water hardness Display of symbols
hard
medium
The machine must be
switched off: press the "on/
soft
off button briefly.
4
To abort the setting process
press the on/off button.
The set water hardness and
the water filter determine the
quantity of water used before des-
caling:
Water Water consumption [L]
hardness without / with water filter
hard 40 400
medium 80 800
Press the "espresso" button
repeatedly and briefly until
soft 120 1200
the required water hardness
setting is displayed.
1
Setting parameters:
EN
water filter ( I )
Water filter Display of symbols
off
on
Factory setting:
No water filter (off) The machine must be
switched off: press the "on/
off button briefly.
48
2 3
Off
Press the "espresso" and on/ The current water hardness
off buttons together. is shown on the display (see
table).
5 6
3 sec. min.
Press the "espresso" button As confirmation, all cup
for at least 3 sec. to store symbols will flash once.
the setting.
8 2 11 3
Off
Press the milk and on/off The current setting is shown
buttons together. on the display (see table).
5
4
3 sec. min.
To change the setting, press Press the milk button for
the milk button again briefly. at least 3 sec. to store the
setting.
1 2
Off
The machine must be Press the "Lungo" and on/off
switched off: press the "on/ buttons together.
off button briefly.
4 5
3 sec. min.
Press the "Lungo" button Hold the "Lungo" button
repeatedly and briefly until down for at least 3 sec. to
the required time to switch- store the setting.
off is displayed.
Setting parameters:
6
water filter ( 2 )
To abort the setting process
press the on/off button.
As confirmation, all cup
symbols will flash once.
3

Parameter setting:

power-off
Information on the automatic
switch off mechanism can be
found on page 53.
Time to
Display of symbols
switch­off
5 min
The current time to switch-
off is shown on the display
15 min
(see table).
6
30 min
60 min
180 min
To abort the setting process
press the on/off button.
As confirmation, all cup
symbols will flash once.
EN
EN
49