Gewiss GW 16 972CB Programmierhandbuch Seite 37

USER INSTRUCTIONS
Heating/cooling selection
Press the button key to access value change; after the
access, the current parameter value is displayed. Select the type
of operation ( = heating;
touch slider or the push-button
the button key within thirty seconds; expiry of the time-out
(30 seconds) or pressing the push-
page without saving it.
Setting the hour
Press the button key to access value change; after access,
adjust the current value using the circular touch slider or the
push-button. To confirm the set value, press the
button key within thirty seconds; expiry of the time-out (30
seconds) or pressing the push-button
change page without saving it.
Setting the minutes
Press the button key to access value change; after access,
adjust the current value using the circular touch slider or the
push-button. To confirm the set value, press
key within thirty seconds; expiry of the time-out (30 seconds)
or pressing the push-button
page without saving it.
Setting the day of the week
Press the button key to access value change; after
access, set the current day (0 = Sunday; 1 = Monday; 2 =
Tuesday; 3 = Wednesday; 4 = Thursday; 5 = Friday; 6 =
Saturday) using the circular touch slider or the
button.
The parameter is only visible if automatic day and time
update (P 38) is "disabled".
To confirm the set value, press the
thirty seconds; expiry of the time-out (30 seconds) or
pressing the push-button
page without saving it.
37
= cooling) using the circular
. To confirm the set value, press
result in exiting the change
result in exiting the
result in exiting the change
button key within
result in exiting the change
E
N
G
L
I
S
H
button
push-