Cleaning The Hood - De Dietrich DHD789X Betriebsanleitung

4/ CLEANING THE HOOD

Careful maintenance helps guarantee proper operation and good results from an appliance
over time.
The hood must be unplugged from the electrical power source, both by unplugging
the appliance from the socket as well as de-activating the breaker, before removing the
metal filters. After cleaning, you must replace the metal filters as outlined in the instruc-
tions.
MAINTENANCE
External surfaces and acces-
sories
Filter cartridge
To preserve the appliance we advise you to use Clearit maintenance products.
Clearit offers appropriate professional products and solutions for the day-to-day maintenance
of your household appliances and kitchens.
You will find these products on sale at your usual retailer together with an entire line of acces-
sories and complementary products.
HOW TO PROCEED?
Do not use
scrubbers, abrasive pro-
ducts, or hard brushes.
After 0 h of operation
the keypad will signal that
the filter is saturated by
lighting up all of the but-
tons. Shut off this messa-
ge by pressing the timer
switch . To remove the
anti-grease grill push the
handle toward the back of
the hood and rotate the
grill downward, removing
it from its housing.
To replace the grill, do the
reverse.
Clearit The experience of
professionals at your service.

ACCESSORY PRODUCTS TO
To clean the external sur-
faces of the hood and the light
metallic
housing screen use only com-
mercially available household
detergents diluted in water.
Then rinse with clean water and
dry with a soft cloth.
To clean the grill, wash it by
hand or in the washing machi-
ne. Clean it at least every two
EN
USE
months.