Blades; General; Water Cooling; Diamond Blades For Different Materials - Husqvarna FS400 LV Bedienungsanweisung

General

• Diamond blades consist of a steel core provided with
segments that contain industrial diamonds.
• Always use a sharp diamond blade.
• The blades should be marked with the same or a
higher speed than that stated on the machine's rating
plate.
• Never use blades other than original blades designed
for the machine.

Water cooling

Water cooling must always be used. This cools the blades
and increases their life and prevents dust build-up.
Diamond blades for different
materials
WARNING! Never use a blade for any
!
other materials than that it was intended
for.
Husqvarna has a wide range of wet cutting blades for floor
and wall cutting, including blades for everything from fresh
to hardened concrete in different hardness classes as
well as a comprehensive range of asphalt blades. Check
with your Husqvarna dealer to see which blades are best
suited for your usage.

Checking the blade

• Check that the blade and the blade guard are not
damaged or cracked. Replace the blade or the blade
guard if it has been exposed to impact or is cracked.
Never use a damaged or worn blade.
• Check that the right amount of water reaches the
blade.

Transport and storage

• Inspect new blades for transport or storage damage.
• The blade should be removed from the machine after
use and stored well. Store the blade dry.
10 – English

BLADES