Key To Symbols; Symbols On The Machine - Husqvarna FS400 LV Bedienungsanweisung

Symbols on the machine:

WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious or
fatal injury to the operator or others.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Wear personal protective equipment.
See instructions under the "Personal
protective equipment" heading.
All displacement of the machine
outside the cutting area shall be carried
out with the tool not in rotation.
Remove the blade prior to hoisting,
loading, unloading and transporting the
machine.
Arrow on tool guard indicating
the direction of tool rotation.
Up and down plunging
The guards should always be fitted on
the machine. Never allow blade
exposure to exceed 180°.
Check the cutting attachment. Never
use blunt, cracked or damaged
equipment.
The blades should be marked with the
same or a higher speed than that
stated on the machine's rating plate. A
cutting blade running at a too high
speed can break or cause serious
damage.
Do not use the machine near ignitable
substances or gases.
2 – English

KEY TO SYMBOLS

WARNING! Dust forms when cutting,
this can cause injuries if inhaled. Use
an approved breathing mask. Avoid
inhaling exhaust fumes. Always
provide for good ventilation.
Hot surface.
Machinery hazard! Always keep all
parts of your body away from blade and
all other moving parts.
Risk of cutting. Keep all parts of your
body away from the cutting equipment.
Transmission stop
Parking brake Activated /
Deactivated
Cutting depth indicator
Fill tank only with water
Keep saw leveled, without blade, when
checking oil level.
N
P
0
300 (12")
350 (14")
400 (16")
450 (18")
Fill Tank Only with
water!
DO NOT fill tank
With Gasoline Or
Flammable Liquids!
Injury Or Death Could
Occur!