General; Machine Stop; Blade Guard; Machine´s Safety Equipment - Husqvarna FS400 LV Bedienungsanweisung

General

WARNING! Never use a machine that has
!
faulty safety equipment! If your machine
fails any checks contact your service
agent to get it repaired.
The engine should be switched off, and
the stop switch in STOP position.
This section describes the machine´s safety equipment,
its purpose, and how checks and maintenance should be
carried out to ensure that it operates correctly.

Machine stop

The machine stop is used to quickly switch off the engine
and all electrical functions except lights.
Testing the machine stop
• Press the machine stop and check that the engine
stops.
• Disengage machine stop button (twist clockwise)

Blade guard

WARNING! Always check that the blade
!
guard is fitted correctly before starting
the machine.
The blade guard is designed to prevent parts of the blade
or cutting fragments from being thrown towards the user.
Checking the blade guard
Check that the blade guard is not damaged or cracked.
Replace the blade guard if it is exposed to impact or is
cracked.
Always check that the guard is correctly fitted before
starting the machine. Also check that the blade is fitted
correctly and is not damaged in any way. A damaged
blade can cause personal injuries.
MACHINE´S SAFETY EQUIPMENT
Muffler
WARNING! Never use a machine without
!
a muffler, or with a faulty muffler. A
damaged muffler may substantially
increase the noise level and the fire
hazard. Keep fire fighting equipment
handy.
The muffler gets very hot during and
after use. This also applies during idling.
Be aware of the fire hazard, especially
when working near flammable
substances and/or vapours.
The muffler is designed to keep noise levels to a minimum
and to direct exhaust fumes away from the user.
Inspecting the muffler
Check regularly that the muffler is complete and secured
correctly.
–
English 7