MAINTENANCE
Grease nipple for depth adjustment
system
Lubricate the grease nipples for setting of the cutting
depth daily.
Nut for feeding of cutting depth
Grease the feeding screw a couple of cm above and
below the nut and adjust the saw up and down a couple
of times to spread the grease.
Worn product
This machine has the prerequisites to last for many years.
This minimizes the machine's environmental impact.
Perform service and maintenance according to the
instructions in this manual. This way the engine will last
longer and the hazardous emissions are minimized.
When the machine is worn out it should be disposed of for
recycling or scrapping. Follow local regulations for
disposal and recycling.
Main materials
Engine
Aluminium (AL), Steel (AC), Copper (CU), Polyamide (PA)
Machine
Steel (AC), Fonte (FT), Aluminium (AL).
–
English
17