Work Area Safety; Basic Working Techniques; Transport And Storage - Husqvarna FS400 LV Bedienungsanweisung

Work area safety

• Observe your surroundings to ensure that nothing can
affect your control of the machine.
• Ensure that no one/nothing can come into contact
with the cutting equipment or be hit by parts if the
blade breaks.
• Do not use the machine in bad weather, such as
dense fog, heavy rain, strong wind, intense cold, etc.
Working in bad weather is tiring and can lead to
dangerous conditions, e.g. slippery surfaces.
• Never start to work with the machine before the
working area is clear and you have a firm foothold.
Look out for any obstacles with unexpected
movement. Ensure when cutting that no material can
become loose and fall, causing injury to the
operator.Take great care when working on sloping
ground.
• Ensure that the working area is sufficiently illuminated
to create a safe working environment.
• Make sure that no pipes or electrical cables are routed
in the working area or in the material to be cut.
• Make sure that electrical cables within the working
area are not live.

Basic working techniques

WARNING! The bladeshaft rotates when
!
the engine is cranked or started.
• This machine is designed and intended for cutting of
fresh and hardened concrete in different hardness
classes and of asphalt. Use in any other way is
considered as contrary to the intended use.
• Always saw in a manner that permits easy access to
the machine stop.
• Check that no tools or other objects have been left
lying on the machine.
• Never leave the machine unsupervised with the motor
running.
• Always check that the blade guard is fitted correctly
before starting the machine. Never cut without using
the blade guard.
• Clearly mark out all cuts to be made before you start
sawing, plan these so they can be carried out without
danger to persons or the machine.
• Do not turn, rotate or move the machine sideways
while the blade is rotating.
• Firmly secure or anchor concrete blocks before
cutting. The heavy weight of cut material can cause
both extensive damage to the machine and serious
personal injury if it cannot be moved under controlled
conditions.
• Make sure that there is always another person close
at hand when you use the machines, so that you can
call for help if an accident should occur.
OPERATING

Transport and storage

• The machine is equipped with transportation wheels,
and can easily be transported without the engine
running. Make sure that the blade is in the top position
before moving the machine.
• Remove the blade before transportation or storage of
the machine.
• Observe care when lifting. You are handling heavy
parts, which imply the risk of pinch injuries or other
injuries.
• Always use the machine mounted lifting eye when
lifting.
• Secure the equipment during transportation in order
to avoid transport damage and accidents.
• For transport and storage of fuel, see the section
"Fuel handling".
• For transport and storage of Blades, see the section
"Blades".
• Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
• If there is a risk of freezing, the machine must be
drained of any remaining water.
–
English 13