Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Auxiliary handle
Always use the auxiliary handle when working with
the angle grinder. Attach the handle to either the left or
right of the tool depending on the application.
Operating instructions
Important:
•
Always remove the plug from the socket before carrying out adjustment, servicing
or maintenance.
•
Use only Ø 125 mm discs or wheels with a bore of 22 mm.
•
Cut-off discs must only be used for cutting (fig. 1), they must never be subjected to
side forces.
•
When grinding (fig. 2), only use grinding discs (depressed centre grinding wheels)
which are designed for surface grinding, as these discs are designed to withstand
side pressures caused by bending.
•
Replace the grinding disc when it is worn down to Ø 85 mm.
Fitting and removing discs
Warning: Always remove the plug from the socket before fitting and removing discs.
Press and hold in the spindle lock button (1).
Remove the outer flange nut (6) using the spanner (5).
fig. 1
11
fig. 2
Werbung
Inhaltsverzeichnis
Fehlerbehebung
