NSK prophy-mate neo Bedienungsanleitung Seite 7

3-2 Connecting Powder case to Handpiece Hose
CAUTION
Before connecting each part, thoroughly dry the coupling, handpiece, hose joint section of the powder
case, inside of the powder case, and nozzle.
Also, perform idle running with air alone to blow off any internal water.
Powder case
AIR
Connect the hose to the powder case.
• PMNG-PTL-P
Connect FM-CL (2,3,4-hole), PTL-CL-4HV (6-pin), or PTL-CL-FV (5-hole) coupling to the handpiece
hose. In case you have any of these couplings mounted on the handpiece hose, you can just simply click
the Prophy-Mate neo handpiece to the coupling.
• 4-Hole, 3-Hole, or 2-Hole type powder case (PMNG-M4-P, PMNG-B2-P)
Connect the powder case directly to the corresponding handpiece hose. Fasten the hose nut tightly.
• Use with Other Handpiece Manufacturers' Coupling
Check with the instruction manual of the coupling you have and connect Prophy-Mate neo accordingly
3-3 Connecting handpiece to Powder case
Pull back the handpiece release collar on the powder
case and push handpiece straight on to the
connection. Let go off the release collar once
handpiece is in place. (Fig.1) Once connected gently
pull handpiece to ensure proper connection.
AIR
Powder case cap
AIR
Internal nozzles
(PMNG-QD-P, PMNG-KV-P, PMNG-WH-P, PMNG-BA-P, PMNG-SR-P)
6
Coupling
Handpiece connection
AIR
handpiece release collar
AIR
AIR
Fig. 1