NSK prophy-mate neo Bedienungsanleitung Seite 10

2) Perform idle running with air alone to discharge
water and powder in the nozzle (Fig. 6)
3) Blow off the powder remaining in the powder case
with air. (Fig. 7)
4) Wipe the nozzle and handpiece with a soft cloth
saturated in alcohol to remove saliva and other
physical contamination.
4-2 Removal of powder from the powder case, handpiece and nozzle
1) Remove the powder case from the hose.
2) Pull back the handpiece release collar and remove
handpiece
3) Remove the nozzle with the nozzle wrench (Fig. 8)
4) Fit the enclosed blower nozzle to the coupling and
attach to the handpiece. Run idle with no water
more than 5 sec. to clear lines. (Fig. 9)
Coupling
Blower nozzles for other brands couplings are also available.
Blower nozzle
(NSK PHATELUS)
Blower nozzle
(KaVo ® MULTIflex ® or
MULTIflex ® LUX Coupling)
9
AIR
Nozzle wrench
Loosen
Handpiece
Fig. 6
Fig. 7
Fig. 8
Fig. 9