Settings; Set Network Settings - Mettler Toledo EasyMax Bedienungsanleitung

4. Settings

Select the Device settings icon to
change Network settings, Time set-
tings, Language settings, retrieve
System information and iC Data
Center Setting.
4.1.

Set Network Settings

NOTE: Set the network settings
only if the device is connected to
iControl.
LAN Connection
This functionality enables you to
change the network configuration.
The DHCP is Enabled by default.
In case the device is connected to
a LAN without DHCP servers, or
directly to a PC, the IP address and
subnet mask can be changed.
If in doubt, ask your local IT
administrator for assistance.
Confirm settings with OK and then
Apply.
8