Inhaltsverzeichnis
Werbung
RESET ALL
All customer settings are reset to the factory settings. The
IMPRESSA then switches off.
For example you want to reset the values for one product to the fac-
tory setting:
READY
Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until RESET appears on the display.
Press the Rotary Switch (1).
PRODUCT
Press the Rotary Switch (1).
SELECT
BUTTON
Press any preparation button, e.g. 1 ESPRESSO.
OK
SELECT
BUTTON
By again pressing the appropriate preparation button, you can
reset other speciality coffees to their factory setting.
SELECT
BUTTON
Press the Rotary Switch (1) to exit the PRODUCT programming item.
Turn the Rotary Switch (1) until EXIT appears on the display.
Press the Rotary Switch (1).
22
RESET
Turn the Rotary Switch (1) again until EXIT appears on the display.
Press the Rotary Switch (1) to exit programming mode.
READY
15.8 Information programme item
In the INFORMATION programme item you can view the fol-
lowing information:
– Total coffee preparations
– Number of speciality coffees prepared, number of 'coffee
powder', 'hot water' and 'steam' preparations
– Maintenance status and number of maintenance pro-
grammes performed (cleaning, descaling, changing the
filter)
– and information relating to the software version
READY
Press and hold the Rotary Switch (1) until RINSE appears on the dis-
play.
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until INFO appears on the display.
Press the Rotary Switch (1).
BUTTONS
Press the Rotary Switch (1) again.
XXXX (=total number of speciality coffees prepared).
To view the number of product preparations, press the prepa-
ration button of the desired speciality coffee. For example, to
view the number of '1 COFFEE' preparations.
Werbung
Inhaltsverzeichnis
