Sony UP-D70A Bedienungsanleitung Seite 20

Printing (Continued)
20
Operation
2The stored image data is printed as soon as the print command is entered
from the computer or the PRINT button of the printer is pressed.
PR I N T I NG
< >
Y E L L OW QT Y
3Depending on the size of image, type of ribbon, and/or resolution mode, it
takes about one to two minutes for a printout to emerge from the paper
outlet.
Once printing has been completed, the printer returns to standby status.
RE ADY
A 4 QT Y
Notes
• Do not pull the paper out till the printer finishes printing.
• To prevent paper jamming, do not allow more than 20 printouts on the paper
cover.
To stop printing midway
Send the stop command from the computer, or press the STOP button. The printer
stops printing, and the following message appears. After the print paper remained
in the printer is ejected, the printer is reset to standby status.
P L E A S E WA I T
Note
When the computer of Windows is used, the computer may hang up if you press
the STOP button during data transmission.
To make a second copy of a printout
Execute the print menu of the computer again or press the PRINT button of the
printer. The image data stored in the memory is printed again.
About memory
The image data sent from the computer is stored in the memory of the printer.
Color indication changes as the color printing
proceeds:
Color printing:
Startingn YELLOWn MAGENTAn CYAN
1 n Finishing
Laminate printing:
Startingn YELLOWn MAGENTAn CYANn
LAMIn Finishing
1