The Suction Pipe; The Floorhead; Large Nozzle; Large Brush Nozzle - Silvercrest SHAZ 21.6 B2 Bedienungsanleitung

• Both small guide pins of the filter carri-
er must fit accurately into the small
openings underneath the unlocking
mechanism 14 of the dust container.
Dust container
11 5
Battery
1 33

7.3 The suction pipe

5
9
20
Only use the dust con-
tainer 11 with the com-
plete filter unit.
• Place the dust con-
tainer 11 on the suc-
tion device 5.
• Hook the bottom end
on and then push
down the upper end
until it engages audi-
bly.
The vacuum cleaner
cannot be operated
without the charged bat-
tery mounted.
• Insert the battery 33
into the battery com-
partment 1 until it en-
gages audibly.
The suction pipe 20 is
used as an extension.
All parts to be connect-
ed to the clear end of
the suction pipe can
also be plugged directly
into the opening 9 at
the suction device 5.
• Insert the suction
pipe 20 into the
opening 9 until it en-
gages.

7.4 The floorhead

In many cases, you will work with the floor-
head.
5
9
20
21
22

7.5 Large nozzle

5
9
20
21
38

7.6 Large brush nozzle

9
21
40
37
You can attach the floor-
head 22 directly to the
suction device 5 or the
suction pipe 20.
• Insert the floor-
head 22 into the
opening 9 of the suc-
tion device 5 or into
the opening 21 of
the suction pipe 20.
The large nozzle 38
can be inserted directly
into the suction device 5
or into the suction
pipe 20.
• Insert the large noz-
zle 38 into open-
ing 9 or 21.
The large brush noz-
zle 37 is always used
with the adapter 40.
• Insert the adapt-
er 40 into open-
ing 9 or 21.
• Plug the large brush
nozzle 37 onto the
adapter 40.
GB
9