Herunterladen Inhalt Inhalt Diese Seite drucken

Installation; Engaging And Disengaging Connections; Prior To Every Use; Filter Unit - Silvercrest SHAZ 22.2 A1 Bedienungsanleitung

Akku-hand- und -bodenstaubsauger
Vorschau ausblenden Andere Handbücher für SHAZ 22.2 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 84
__CPE284657_Staubsauger_B3.book Seite 9 Montag, 12. Dezember 2016 8:15 20

7. Installation

With its extensive accessories, there are nu-
merous options enabling you to react per-
fectly to almost any conceivable requirement
on a vacuum cleaner. In this section, we de-
scribe the assembly for the most frequent ap-
plications.
CAUTION:
During all assembly steps, the vacuum
cleaner must be switched off.
7.1 Engaging and disengag-
ing connections
There are two ways to mount and dismantle
parts.
The suction pipe 19, the floorhead 21, the
dust container 10, the filter covers 4 and
the battery 32 are inserted until they en-
gage audibly. Press the respective release
button to disengage the connections.
All other parts are pushed on and pulled off.
If necessary, slightly rotate the parts in oppo-
site directions.

7.2 Prior to every use

Prior to every use, the following parts must
be assembled:

Filter unit

The filter unit consists of:
6
the filter carrier 7, the
metal filter 11 and the
paper filter 6.
7
• Always insert the
11
13
10
• Both small guide pins of the filter carri-
Dust container
Battery

7.3 The suction pipe

complete filter unit
into the dust contain-
er 10.
er must fit accurately into the small
openings underneath the unlocking
mechanism 13 of the dust container.
Only use the dust con-
10
5
tainer 10 with the com-
plete filter unit.
• Place the dust con-
tainer 10 on the suc-
tion device 5.
• Hook the bottom end
on and then push
down the upper end
until it engages audi-
bly.
The vacuum cleaner
cannot be operated
without the charged bat-
tery mounted.
• Insert the battery 32
into the battery com-
1
32
partment 1 until it en-
gages audibly.
The suction pipe 19 is
5
used as an extension.
All parts to be connect-
ed to the clear end of
the suction pipe can
also be plugged directly
into the opening 8 at
8
the suction device 5.
• Insert the suction
pipe 19 into the
opening 8 until it en-
19
gages.
9
GB

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis