Parametric Input Equalizer - LD Systems LDDSP44K Bedienungsanleitung

10.1 CHANNEL 1 to 4 - As soon as you click on the editing field of the desired channel, the border color will change to blue.
- Click on the arrow icon (up arrow) to increase or decrease (down arrow) the gain by 0.1 dB.
10.2
10.3 Virtual Fader - Click and hold the Virtual Fader button and move it upwards to increase the gain or downwards to decrease it.
dB Display / Input Field - Displays the amplification in dB and allows direct input via keyboard.
10.4
10.5 Polarity - - Click this button to invert the polarity of the signal and then set it back to normal polarity
(orange button for inverted polarity)
10.6 Mute - Click this button to mute the signal and then unmute it (red button for muted signal).
Signal Level Display
10.7
LINK - Before editing, you can link the channels whose settings are to be the same (check the box).
10.8
The settings must therefore only be applied to one channel and will be automatically applied to linked channels.
- Click on the arrow icon to increase or reduce the signal delay of the corresponding channel.
10.9
10.10 Virtual Fader - Click and hold the Virtual Fader button and move it upwards to increase the signal delay or downwards to decrease it.
Display / Input Fields - Displays the signal delay in meters (m), feet (feet), and milliseconds (ms), and allows direct input via keyboard.
10.11
10.12 Total Gain - Displays the sum of the INPUT CHANNEL GAIN and GROUP GAIN in dB.
Total Delay - Displays the sum of INPUT CHANNEL DELAY and GROUP DELAY in meters (m), feet (feet), and milliseconds (ms).
10.13

PARAMETRIC INPUT EQUALIZER

10.14
10.17
10.15
10.18
10.14
10.17
10.16
10.19
10.23
FREQUENCY
- Click on the arrow icon to increase or decrease the chosen EQ bands in 1 Hz intervals.
10.14
10.15 Virtual Fader - Click and hold the Virtual Fader button and move it upwards to increase the frequency or downwards to decrease it.
Display / Input Field - Displays the frequency in Hertz (Hz) and allows direct input via keyboard.
10.16
FILTER QUALITY Q
- Click on the arrow icon to set the quality factor of the chosen EQ band from 0.2 to 20.
10.17
10.18 Virtual Fader - Click and hold the Virtual Fader button and move it upwards or downwards to set the quality factor
as desired.
10.19 Display / Input Field - Displays the quality factor and allows direct input via keyboard.
20
10.24
10.20
10.25
10.26
10.21
10.28
10.20
10.22
10.29
10.30
10.27