Private Exchanges / T-Net; R" Button On Private Exchanges; R" Button And The Deutsche Telekom T-Net; Inserting An Automatic Pause - AUDIOLINE DECT 7800 Bedienungsanleitung

7

Private exchanges / T-NET

You can use the "R" signal button on your telephone on private exchanges and
when using DEUTSCHE TELEKOM's T-Net functions.
7.1

"R" button on private exchanges

If you have connected your telephone to a private exchange, you can use all the
facilities such as call transfer, automatic recall, etc. The "R" signal button gives you
access to these facilities. The FLASH time "84ms" will be required on a private
exchange. (Adjustment, see 9.3). You can find out from the dealer from whom the
equipment was purchased whether your telephone will work on your private
exchange without any problems.
7.2

"R" button and the DEUTSCHE TELEKOM T-Net

Your telephone supports the most important DEUTSCHE TELEKOM added value
functions (e.g. brokering, call waiting, three-way conference, etc.). The T-Net works
using the "FLASH 270ms" setting (adjustment, see 9.3). Please contact
DEUTSCHE TELEKOM to gain access to T-Net functions.
7.3

Inserting an automatic pause

With some private exchanges, it is necessary to dial a certain number (e.g. "9" or
"0") in order, after a short pause, to obtain a dialling tone for an outside line on the
extension. After being set up for your exchange, your telephone will automatically
insert a pause of ca. 3 seconds after each first digit for obtaining an outside line.
Note: If you have not connected your telephone to a private exchange you should
always turn this function off.
You can find out in Chapter 9.3 how to activate the automatic pause.
- Private exchanges/T-NET -
61